The purpose of this article is to explain the options under the DCA Wrangler View menu.


View Menu


After running the Decline you automatically get one visualization per well showing Oil, Gas, GOR, Yield, and forecast streams. Then the user can customize what models, streams, type curve groups and type curves streams to show by using the View button. 


IMPORTANT NOTE: Remember to be aware of the Mode you are using. For Autocast, you will only see the Model and Streams menus but for Type Curve the menu will contain Curves and Groups as well.



Option Description
Streams The Streams dropdown allow a user to select specific streams to view. These streams are duplicated for each model.
Selecting the down arrow will allow the user to select the desired streams to view.

Available from both Autocast and Type Curve modes.

IMPORTANT NOTE: Well Count is only available in Type Curve mode.
Model The Model dropdown contains available models to view for the current well(s). These models are populated based on your current marking and the models that are available. Previously saved models can be accessed via Sync on the DCA Wrangler toolbar.


Selecting the down arrow will allow the user to select the desired model to view.

Available from both Autocast and Type Curve modes
Auto Zoom (months) Auto Zoom will adjust the DCA Wrangler plot x-axis to the specified time period. This time is entered as months.

After all view options are selected, Save will save the the configuration and exit the menu. Cancel will exit the menu while reverting all changes.

Available from both Autocast and Type Curve modes
Curves The Curves dropdown contains Well Lines, P10, P50, P90, and Avg curve options for the DCA Wrangler plot.

Selecting the down arrow will allow the user to select the desired curves to view.

Available only from both Type Curve mode
Groups The Groups dropdown contains the names of the groups of wells you used for type curve analysis. Selecting the down arrow will allow the user to select the desired groups to view.

Available only from both Type Curve mode